How to upload new firmware:

- New Firmware file

- Evo Cam II

- New USB drive

Serial Number and Firmware:

- Note down the Serial # from the backside of the Evo Cam II Head

- Note down the Firmware version from the Evo Cam II

 Press Menu – Scroll down to Settings > User Interface > License > “i” Information Text.

 Press select (center button) while the (i) icon is highlighted. The current software revision will then be displayed in the center of the screen.

Updating the firmware:

To import the new upgraded Firmware file into the Evo Cam II

- Ensure the EVO Cam II is in Standby State. This is when the unit has a live power cable connected, but the unit is not powered on

- Insert the USB stick with the updated Firmware on the side of the EVO Cam II USB port

- Hold down the Zoom In & Zoom Out keys and simultaneously press the power button

- The power light will flash red while the update is processed. You can let go of the buttons now. This process will take around 30 seconds

- Perform a power cycle by switching off the power at the plug (or removing it) and connecting again.

- Power up the unit as normal. Turn the unit back ON. Ok to Unplug the flash drive

Verify the firmware update by checking that the firmware version as explained above.