Download and Unzip the EVO CAM II Firmware V03.00.00 >>>>>>>>>>>

Updating the firmware:

To import the new upgraded Firmware file into the Evo Cam II

- Ensure the EVO Cam II is in Standby State. This is when the unit has a live power cable connected, but the unit is not powered on

- Insert the USB stick with the updated Firmware on the side of the EVO Cam II USB port

- Hold down the Zoom In & Zoom Out keys and simultaneously press the power button

- The power light will flash red while the update is processed. You can let go of the buttons now. This process will take around 30 seconds

- Perform a power cycle by switching off the power at the plug (or removing it) and connecting again.

- Power up the unit as normal. Turn the unit back ON. Ok to Unplug the flash drive

Verify the firmware update by checking that the firmware version as explained below.

Verify Firmware Version:

- Note down the Firmware version from the Evo Cam II

 Press Menu – Scroll down to Settings > User Interface > License > “i” Information Text.

 Press select (center button) while the (i) icon is highlighted. The current software revision will then be displayed in the center of the screen.