Download and Unzip the EVO CAM II Firmware V02.00.12 >>>>>>>>>>>

The New Firmware v02.00.12 Provides Performance Enhancements

• Improved EVO Cam II USB3 interface. This reduces the likelihood of ‘image freeze’ which is caused by the PC not reading the video stream at a fast enough rate*. This is a normal event (which should not cause the image to freeze) and the PC will request a restart via the USB command channel. With the new firmware release, this operation is now handled more efficiently.

*With DimensionTwo, this event produces a chiming sound to notify the user of a communication issue.

• Crosshair alignment is now unaffected by firmware upgrades. With previous firmware upgrades, the update process reset the crosshair to the default center of the screen and not the center of the optical axis. So following a firmware update, the crosshair had to be manually reset. This is now no longer the case; the current position of the crosshair will be unaffected by the firmware update.

Note that the release version number (2.00.12) does NOT appear in the internal version number. I mention this because, by coincidence, the release version number has been the same as the middle section of the internal version number in previous firmware releases.

Updating the firmware:

To import the new upgraded Firmware file into the Evo Cam II

     - Ensure the EVO Cam II is in Standby State. This is when the unit has a live power cable connected, but the unit is not powered on

     - Insert the USB stick with the updated Firmware on the side of the EVO Cam II USB port

     - Hold down the Zoom In & Zoom Out keys and simultaneously press the power button

     - The power light will flash red while the update is processed. You can let go of the buttons now. This process will take around 30 seconds

     - Perform a power cycle by switching off the power at the plug (or removing it) and connecting again.

     - Power up the unit as normal. Turn the unit back ON. Ok to Unplug the flash drive

Verify the firmware update by checking that the firmware version as explained below.

Verify Firmware Version:

     - Note down the Firmware version from the Evo Cam II

 Press Menu – Scroll down to Settings > User Interface > License > “i” Information Text.

 Press select (center button) while the (i) icon is highlighted. The current software revision will then be displayed in the center of the screen.